DCS losing Focus when transmitting on Teamspeak

Here you will find information relating to Comms systems that we use at RAF Air UK
Post Reply
Flyco
Site Admin
Posts: 1909
Joined: 11 Jan 2015, 14:30
Location: York

DCS losing Focus when transmitting on Teamspeak

Post by Flyco »

We found Sherbert's problem, but it is not one I have met before.

With TeamSpeak and DCS running, when he transmits on TeamSpeak he loses focus on DCS. This means that he loses all input to DCS until he re-clicks back on the DCS screen - by which time he has lost control of the aircraft.

He uses multiple screens and I think this is where the problem arises. However, I also use three screens and don't have this problem. Has anyone any suggestions?

-Sudden flash of Light!!! - Sherbert a thought has occurred to me. Check that in the DCS Controls page you do not have Full Screen ticked. I seem to recall that unticking that in my set-up cured some focus type problems, although the details are lost in my dead brain-cells.

Let me know whether that is better - If not we can get together for an hour one evening and work through your multi-screen set-up.
Wing Commander Alan Johnson - RAFAir UK
Image
Image Image Image Image

Sherbet

Re: DCS losing Focus when transmitting on Teamspeak

Post by Sherbet »

I do have full screen checked. PC shut down now but ill try again tomorrow night and report back. Hopefully that's the issue.

Thanks Alan

Post Reply

Return to “Flight Communications Support”