Instrument Flying (IF) Phase
Instrument Flying (IF) Phase
Attached are the files needed for the Hornet OCU Instrument Flying (IF) Phase.
- Attachments
-
- Vaz312.pdf
- (1.21 MiB) Downloaded 192 times
-
- Vaz 132.pdf
- (1.21 MiB) Downloaded 164 times
-
- UGKO.pdf
- (871.7 KiB) Downloaded 166 times
-
- Bat126.pdf
- (579.5 KiB) Downloaded 171 times
Wing Commander Will, OC 41(F)Sqn - RAFAir UK
Re: Instrument Flying (IF) Phase
Will and Ade, we recently discussed the use of Jepperson charts for OCU training, and I mentioned that the frequencies and other details were different from the DCS ones.
They can be found in "DCS World\Doc\Chart". Admittedly these are limited in coverage (Caucasus only), and do not cover runway approaches, but they do have the correct DCS frequencies (including ILS, TAC, Beacons and markers), detailed airfield layouts, and Jet Arr/Dep procedures.
Unfortunately, DCS have never expanded these to cover Nellis and the Gulf.
They can be found in "DCS World\Doc\Chart". Admittedly these are limited in coverage (Caucasus only), and do not cover runway approaches, but they do have the correct DCS frequencies (including ILS, TAC, Beacons and markers), detailed airfield layouts, and Jet Arr/Dep procedures.
Unfortunately, DCS have never expanded these to cover Nellis and the Gulf.
Wing Commander Alan Johnson - RAFAir UK
