Is anyone flying the A-10C_2 with Track-IR, and if so do you have any gearing set between Head movement and look-direction. I find that by the time I am looking off by around 45 degrees or so, the HMD is too far from my centre-of-view to be useable.
I am also still having Helios problems.
I am beginning to think I am going to be stuck with the basic A-10C for the future.
Track-IR and HMD
Track-IR and HMD
Wing Commander Alan Johnson - RAFAir UK
- john (scooby)
- Posts: 1910
- Joined: 31 May 2018, 15:40
Re: Track-IR and HMD
you can tune the axis in track ir software
Sqn Ldr (Scooby) Burton RAF Air UK
XI(F) Sqn 2ic
XI(F) Sqn 2ic
Re: Track-IR and HMD
Alan,
Sorry, can't help. I use the delanclip, with opentrack.
Sorry, can't help. I use the delanclip, with opentrack.
Flt Lt Geoff Mansfield RAF Air UK
Re: Track-IR and HMD
Hi Alan have you tried the check box to render the sight for both eyes i do this for vr otherwise the site is only in one eye sounds like it could be that its being offset if that make4s sense perhaps just a thought.
I think its under the special tab for A10c2.
I think its under the special tab for A10c2.
Pilot Officer Jeremy "Weasel" Lambert - RAF AIR UK