Operation Badgers Strike - 15/02/22
Re: Operation Badgers Strike - 15/02/22
Tried to open the file with the CAW flights and it tells me I need the "FRENCHPACK". Didn't appear for me on the original intel map. Any ideas?
Daniel callsign: 'Boos' - RAF Air UK
Re: Operation Badgers Strike - 15/02/22
Dont worry, I've already rectified....its because if you have the french pack instslled it usessone of the same files as the dimz we have in our modpack......therefore overwriting them.
My advice would be not to install the French pack on your pc.
I have already removed and reedited the effected objects to the dimz we have in the RAFAir UK modpack.
So no problems for our guys
My advice would be not to install the French pack on your pc.
I have already removed and reedited the effected objects to the dimz we have in the RAFAir UK modpack.
So no problems for our guys
Air Commodore Matt Purnell - RAF Air UK
CO 1(F) Squadron
CO 1(F) Squadron
Re: Operation Badgers Strike - 15/02/22
Okay, more people have joined so this is last edit, I've added us properly on to Carrier and included 8 F-18's sorry to be a pain in the arse. If you've already added to save annoyance for you just copy and paste Enfield 1 for 4 more jets and if possible just change AI callsigns to Enfield 2-1, 2-2 etc for second group.
- Attachments
-
- Objective_Badgers_Strike_CAW_11F_Map FINAL.miz
- (540.45 KiB) Downloaded 57 times
Re: Operation Badgers Strike - 15/02/22
Hi all, updated FRAG (changing active runway at Vaziani to 13 to coincide with the wind)
Air Commodore Matt Purnell - RAF Air UK
CO 1(F) Squadron
CO 1(F) Squadron
Re: Operation Badgers Strike - 15/02/22
3(F) will provide all-altitude CAP with 5 x F-16Cs, split into two flights (west and east), both north of the area of operations.
Grillman
Grillman
Flight Lieutenant Dimitris "Grillman" Christoulakis - RAF Air UK
Re: Operation Badgers Strike - 15/02/22
Hi all,
Please see attached check miz, please PM me if anything has not copied across correctly by late Monday night.
all the best!
Matt
Please see attached check miz, please PM me if anything has not copied across correctly by late Monday night.
all the best!
Matt
Air Commodore Matt Purnell - RAF Air UK
CO 1(F) Squadron
CO 1(F) Squadron
Re: Operation Badgers Strike - 15/02/22
Matt,
There are several changes that have been made to the check miz, for 97Sq. Rather than send an updated miz, the changes spotted are:-
1. Call signs for all have changed from Boar to Uzi. They should be Boar.
2. A/C speeds have changed. In the cruise they were 240kts. Now they are 250- 270.
3. Alan fixed our T/O time to 0830. It's now fixed at 0800hrs.
Speeds and T/O times are of little concern, as we do not appear to have any TOTs to concern us.
Lots of aircraft at Vasiani. We should see all of them taxi past us, before we start moving to the active.
There are several changes that have been made to the check miz, for 97Sq. Rather than send an updated miz, the changes spotted are:-
1. Call signs for all have changed from Boar to Uzi. They should be Boar.
2. A/C speeds have changed. In the cruise they were 240kts. Now they are 250- 270.
3. Alan fixed our T/O time to 0830. It's now fixed at 0800hrs.
Speeds and T/O times are of little concern, as we do not appear to have any TOTs to concern us.
Lots of aircraft at Vasiani. We should see all of them taxi past us, before we start moving to the active.
Flt Lt Geoff Mansfield RAF Air UK
Re: Operation Badgers Strike - 15/02/22
No probs Geoff, id imagine sending another version would create the same result, i will make the changes manually to save further issues....good old DCS this is why we send the check file
Air Commodore Matt Purnell - RAF Air UK
CO 1(F) Squadron
CO 1(F) Squadron
Re: Operation Badgers Strike - 15/02/22
Geoff your only TOT is 0445Z for the Arty sites (which flying at 240 will achieve if taking off at 0430Z)
Air Commodore Matt Purnell - RAF Air UK
CO 1(F) Squadron
CO 1(F) Squadron
Re: Operation Badgers Strike - 15/02/22
Just a quick one the air to air tacans don't work as they are set in the miz file of yours Matt (currently known bug), if you untick the "bearing" box in the activate tacan advanced waypoint they will work like a regular tacan with range and bearing, but left ticked you won't get range on the hud or mfd etc. It applies to both refuelers , basket and the Vipers/A10s boom tanker